In some cases gun-metal bolts are used, as they resist the
action of sea water better than steel, but they add
considerably to the cost of the outfall sewer, and the
principal advantage appears to be that they are possibly easier
to remove than iron or steel ones would be if at any time it
was required to take out any pipe which may have been
accidentally broken. On the other hand, there is a liability of
severe corrosion of the metal taking place by reason of
galvanic action between the gun-metal and the iron, set up by
the sea water in which they are immersed. If the pipes are not
to be covered with concrete, and are thus exposed to the action
of the sea water, particular care should be taken to see that
the coating by Dr. Angus Smith's process is perfectly applied
to them.
[Illustration: Fig. 22.--Spigot and Socket Joint for Cast Iron Pipes.]
[Illustration: Fig. 23.--Lug Joint for Cast Iron Pipes.]
[Illustration: Fig. 24.--Turned, Board, and Flanged Joint for Cast Iron Pipes.]
Steel pipes are, on the whole, not so suitable as cast iron.
They are, of course, obtainable in long lengths and are easily
jointed, but their lightness compared with cast iron pipes,
which is their great advantage in transport, is a disadvantage
in a sea outfall, where the weight of the structure adds to its
stability.
Pages:
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109